Satlook Combolook Colour TV + Sat Meter Spectrum Analyzer.. BEST TOOL TO INSTALL SATELLITE TV & AERIALS .
The COMBOLOOK COLOR is a swedish made SAT-TV/CATV instrument and spectrum-analyzer. The unit is made for exact alignment and adjustment of satellite-dishes, aerial  antennas. It is also an exellent tool for working with Cable-TV networks. It is intended for professional use when high accuracy and precise information are needed.

It´s easily operated without a lot of unnecessary buttons and knobs. The basic functions are easy to get a hold on and takes only minutes to learn.

EMITOR SATLOOK COMBOLOOK Colour

The COMBOLOOK COLOR is a swedish made SAT-TV/CATV
instrument and spectrum-analyzer. The unit is made for
exact alignment and adjustment of satellite-dishes, aerial
antennas. It is also an exellent tool for working with Cable-TV
networks. It is intended for professional use when high
accuracy and precise information are needed.
It´s easily operated without a lot of unnecessary buttons and
knobs. The basic functions are easy to get a hold on and takes
only minutes to learn.

The COMBOLOOK COLOR is able to work with the return-path
signals in Cable-TV networks (5-65 MHz). according to the
EN50083 standard. The TV-part presents the full range
spectrum of 2-900 MHz which can be zoomed into smaller
parts (min 13 MHz-span). The TV-part is very sensitive and
accurate. It presents signals ±1dB (at +20° C).
The SAT-part also has very high resolution and accuracy.
It presents measured data ±1½ dB (at 20° C). The Sat-TV
spectrum can be expanded (zoom in) for correct adjustment
of the polarisation (“cross-polarisation”).
The SAT- part presents, under one of the sub menus, digital
information like BER (bit error rate), constellation-diagram
(QPSK) and S/N (signal/noise ratio).
The NIT function of the SAT-part can identify the various TVsatellites
by reading out the NIT in the Bitstream (NIT =
Network Information Table). The NIT also contains info about
the transponders TV and Radio-channels.


COMBOLOOK COLOR can handle a lot of memory-positions
and both spectrum-pictures and certain frequencies can be
saved (both analog and digital transponders). The power of
the instrument is supplied by a built in and rechargeable
battery.

Technical specification:
Input frequency: 5-900 Mhz and 920-2150MHz.
Sat-TV min level in: About 35 dBuV (noise).
Sat-TV max level in: About 90 dBuV.
CATV max input level, picture: 110 dByV.
Spectrum: 120 dByV.
Sat-TV attenuation: 15 dB attenuator on/off.
CATV attenuation: 45 dB in 1 dB step.
Display of signallevel (analog): dB on LCD/monitor. Pitch-tone.
Sat-TV accuracy: ±1½ dB (@ +20° C)
CATV accuracy: ±1 dB (@ +20° C)
CATV resolution bandwidth: 1 MHz or 300 kHz.
CATV video bandwidth: 100, 10 ,1 kHz or 100Hz
Sat-TV Digital display of
signallevel:
Satellite-indentification: Yes, by reading out the NIT in the
Bitstream. Info about the TV and
Radio channels.
TV standard: Multi TV/ (PAL, NTSC, SECAM).
CATV text-TV (CEEFAX): Yes.
KU- C-band: Yes, selectable.
Input impedance: 75 Ohm, BNC-con.
Picture-screen: 5” 16:9 TFT-LCD monitor
Menus: On LCD 64x128.
Memory: Lots of spectrum pictures can be
stored with name.
Stored spectrum can be mixed
for easy identification of satellite.
-“Maxhold”-function.
Favouritechannels: Both analog and digital frequencies
can be stored (with name).
PC-connection: RS232-output and PC-software.
Sat-TV power out: Yes, 13-18V.
CATV power out: On/off. 15-24 volt.
Sat-TV control: 22 kHz, DiSEqC, SatScan Sat-
Select-positioner.
DiSEqC Yes, all 1.0 and 1.1. 1.2
Toneburst on/off.
DiSEqC actuator: Built in positioner for DiSEqC 1.2,
SatScan and SatSelect.
Battery: Rechargable 12v, 3.5 amp/hour.
Weight: About 4 kg incl.battery.
Input frequency:

Accessories:

Nylon carrying-case.
Power-supply of 220v/13.5v,
1.7amp. Car-charger, BNC/Fadapters.
S/N (signal/noise-ratio) BER (bit
error rate) Constellation (QPSK)
Technical Specifications:

nput frequency: 5-900 Mhz and 920-2150MHz.

Sat-TV min level in: About 35 dBuV (noise).

Sat-TV max level in: About 90 dBuV.

CATV max input level, picture: 110 dByV.

Spectrum: 120 dByV.

Sat-TV attenuation: 15 dB attenuator on/off.

CATV attenuation: 45 dB in 1 dB step.

Display of signallevel (analog): dB on LCD/monitor. Pitch-tone.

Sat-TV accuracy: ±1½ dB (@ +20° C)

CATV accuracy: ±1 dB (@ +20° C)

CATV resolution bandwidth: 1 MHz or 300 kHz.

CATV video bandwidth: 100, 10 ,1 kHz or 100Hz

Sat-TV Digital display of

signallevel:

Satellite-indentification: Yes, by reading out the NIT in the

Bitstream. Info about the TV and

Radio channels.
TV standard: Multi TV/ (PAL, NTSC, SECAM).

CATV text-TV (CEEFAX): Yes.

KU- C-band: Yes, selectable.

Input impedance: 75 Ohm, BNC-con.

Picture-screen: 5” 16:9 TFT-LCD monitor

Menus: On LCD 64x128.

Memory: Lots of spectrum pictures can be

stored with name.

Stored spectrum can be mixed

for easy identification of satellite.

-“Maxhold”-function.
Favouritechannels: Both analog and digital frequencies

can be stored (with name).
PC-connection: RS232-output and PC-software.

Sat-TV power out: Yes, 13-18V.

CATV power out: On/off. 15-24 volt.

Sat-TV control: 22 kHz, DiSEqC, SatScan Sat-

Select-positioner.
DiSEqC Yes, all 1.0 and 1.1. 1.2

Toneburst on/off.
DiSEqC actuator: Built in positioner for DiSEqC 1.2,

SatScan and SatSelect.
Battery: Rechargable 12v, 3.5 amp/hour.

Weight: About 4 kg incl.battery.

Accessories: Nylon carrying-case.

Power-supply of 220v/13.5v,

1.7amp. Car-charger, BNC/Fadapters.